Softwareupdate
============================================

Installation:
extract

DOWN.BAT
DOWN2.BAT
INFO.TXT
data\autoupdate
data\update.exe
data\tsd27010203200130460740.pad

Please check under System / hardware manager COM-Port settingsare as follows:

Bits per Sec:	115200
Data bits:		8
Paritt:		keine
Stopbits:		1
Protocoll:		Hardware

Please connect your PC and your receiver with a serial cable with following specification:

Sub-D 9pol male         Sub-D 9pol female
1-----------------------1
2-----------------------2
3-----------------------3
4-----------------------4
5-----------------------5
6-----------------------6
7-----------------------7
8-----------------------8
9-----------------------9

RS 232 Update-cable availabe under article number 0000/3622.


Please copy "autoupdate" and "tsd27010203200130460740.pad" to an USB-memory-stick.


Please switch on the receiver and tune to any channel.
If you want to update via COM1 start DOWN.BAT or via COM2 start DOWN2.BAT by double clicking.
If you want to update via USB-memory-stick connect the USB-memory-stick to the receiver and switch on the receiver.

Attention!!!
Software not for DOS, only Windows 95,98,ME,NT,
2000 and XP.

If you have started the update you may not interrupt it.
In case of errors or update time longer than 10 minutes, please try again.

(c) TechniSat 2006
Changes without prior notice possible